Graduate Schools

Okayama University

1 - 50 out of 322 results

Filter

2023

Effects of Urban Heat Island Countermeasures on Energy Consumption and Indoor Thermal Comfort in Densely-built Wooden House Area
Liu, S., Levinson, R. & Narumi, D., May 2023.
Research output: Contribution to conference › Paper
Examination of CO2 Reduction Effect by Constructing Low Carbon Scenarios in Residential and Transportation Sector of Betwixt Mountainous Area
Yan, C., Shimoda, Y. & Narumi, D., May 2023.
Research output: Contribution to conference › Paper
Regional Assessment of the Impact of Urban Heat Island Countermeasures on Energy Consumption in Japan
Kanno, A., Levinson, R. & Narumi, D., May 2023.
Research output: Contribution to conference › Paper
Research on Power Consumption Calculation Method for Refrigerating and Space Conditioning Considering Heat Balance in a Grocery store
Fujita, M. & Narumi, D., May 2023.
Research output: Contribution to conference › Paper
2021
Estimation of Thermal Deformation of CNC Lathe Based on Measurement of Temperature Rise
Otera, K., Onishi, T., Katayama, T., Shiraga, D., Akai, T., Suetake, T., Honda, K., Miyake, N. & Ohashi, K., 2021, p. 118-120. 3 p.
Research output: Contribution to conference › Paper › peer-review
Fundamental Study on Calcination Method of Limestone by Using CW Laser of Near-infrared
Miyajima, T., Okamoto, Y., Fujiki, S., Oka, M., Shizuka, S. & Okada, A., 2021, p. 345-346. 2 p.
Research output: Contribution to conference › Paper › peer-review
Fundamental Study on Laser Forming Characteristics of Carbon Fiber Reinforced Thermoplastic Sheet
Kitada, R., Watanabe, R., Kawazoe, T., Okamoto, Y. & Okada, A., 2021, p. 349-350. 2 p.
Research output: Contribution to conference › Paper › peer-review
Fundamental Study on Side Surface Smoothing of Hole by Large-area EB Irradiation Method
Lu, J., Shinonaga, T., Inoue, M. & Okada, A., 2021, p. 321-322. 2 p.
Research output: Contribution to conference › Paper › peer-review
Surface Smoothing and Surface Modification of Maraging Steel by Large-area EB Irradiation
Watanabe, S., Shinonaga, T., Yamaguchi, A. & Okada, A., 2021, p. 323-324. 2 p.
Research output: Contribution to conference › Paper › peer-review
2020
Applicability of unsaturated soil mechanics for resilient modulus: Case study of a Korean experience
Park, S. W., Park, H. S., Kim, B. S. & Kato, S., 2020.
Research output: Contribution to conference › Paper › peer-review
Droplet diameter measurement near a nozzle exit of a gasoline DISI injector using PDA
Kawahara, N., Mori, B. & Tomita, E., 2020.
Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus)
Dynamic geometrical analysis of high-enstrophy structures in isotropic turbulence
Hattori, Y. & Ishihara, T., Jan 1 2020.
Research output: Contribution to conference › Paper › peer-review
Empirical approach for estimating wetting path of soil water characteristic curve
Park, H. S., Kim, B. S. & Park, S. W., 2020.
Research output: Contribution to conference › Paper › peer-review
Estimation of turbulence-development by a multifractal theory
Arimitsu, T., Arimitsu, N., Takechi, K., Kaneda, Y. & Ishihara, T., Jan 1 2020.
Research output: Contribution to conference › Paper › peer-review
Evaluation of expected damage costs for earth-fill breaches due to heavy rains by response surface method
Nishimura, S. I., Shuku, T. & Shibata, T., 2020.
Research output: Contribution to conference › Paper › peer-review
Evaluation of the spatial variability of cone penetration resistance inside an earth-fill dam composed of materials with different particle sizes with use of geostatistics
Imaide, K., Nishimura, S., Shibata, T. & Shuku, T., 2020.
Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus)
Experimental and numerical study of chaotic mixing in a curved-square duct flow
Hayamizu, Y., Yanase, S., Nishida, K. & Yamamoto, K., Jan 1 2020.
Research output: Contribution to conference › Paper › peer-review
Flood simulation model coupled with woody vegetation wash-out in the lower Asahi River, Japan
Nagata, K., Yoshida, K., Maeno, S., Nigo, S. & Islam, M. D. T., 2020.
Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus)
Surrogate models based on sparse estimation for geotechnical reliability analysis
Shuku, T., Nishio, M., Nishimura, S. & Shibata, T., 2020.
Research output: Contribution to conference › Paper › peer-review
Thin shear layers in high Reynolds number turbulence - A coherent-structure model
Hunt, J. C. R., Ishihara, T. & Kaneda, Y., Jan 1 2020.
Research output: Contribution to conference › Paper › peer-review
Thin shear layers in high Reynolds number turbulence - DNS results
Ishihara, T., Hunt, J. C. R. & Kaneda, Y., Jan 1 2020.
Research output: Contribution to conference › Paper › peer-review
Verification of stiv analysis of flood discharge at nakano observatory in the ota river by flow analysis using alb data
Yoshida, K., Nigo, S., Maeno, S., Mano, K. & Nakano, M., 2020.
Research output: Contribution to conference › Paper › peer-review
中国国内における蛍光灯の廃棄処理に伴う環境影響評価
哈布尓, 三保和久 & 藤原健史, Jun 2020, p. 462-465. 4 p.
Research output: Contribution to conference › Paper
2019
3D CFD of auto-ignition at the end gas region in dual-fuel gas engine
Kawahara, N. & Tomita, E., 2019.
Research output: Contribution to conference › Paper › peer-review
A review on plastic issues: challenges and opportunities
Habuer & Fujiwara, T., Nov 2019, p. 10. 1 p.
Research output: Contribution to conference › Paper
Effect of suction stress on strength characteristics of a compacted silty soil under low confining pressure
Kato, S., Lohani, T. N., Kim, B. S. & Park, S. W., 2019, p. 46-51. 6 p.
Research output: Contribution to conference › Paper › peer-review

Open Access
Evaluation of capillary barrier system under lateral non-flow condition of sand layer
Kim, B. S., Takeshita, Y., Park, S. W. & Kato, S., 2019.
Research output: Contribution to conference › Paper › peer-review
Experimental verification of the continuous pressurization method on SWCC
Park, H. S., Kim, B. S., Kato, S. & Park, S. W., 2019.
Research output: Contribution to conference › Paper › peer-review
Field techniques for measuring soil hydraulic properties in unsaturated soils
Takeshita, Y., 2019, p. 1-7. 7 p.
Research output: Contribution to conference › Paper › peer-review

Open Access
Identification of spatial distribution of permeability in dikes by CPTs
Nishimura, S. I., Imaide, K., Shibata, T. & Shuku, T., 2019.
Research output: Contribution to conference › Paper › peer-review
Influence of particle diameter on numerical PIV measurement using DNS data of turbulent premixed flame
Naka, Y., Tsuboi, K., Tomita, E. & Hasegawa, T., Jan 1 2019.
Research output: Contribution to conference › Paper › peer-review
Magnetic NDE system for detection of crack in steel deck with high lift-off using secondary differential detection coil
Goda, Y., Shobu, H., Kobara, T., Sakai, K., Kiwa, T., Tsukamoto, A., Tanabe, K. & Tsukada, K., 2019.
Research output: Contribution to conference › Paper › peer-review
Optimization of applied magnetic field methods for various shape defects by eddy current testing using magneto resistive sensor
Kobara, T., Goda, Y., Shobu, H., Sakai, K., Kiwa, T. & Tsukada, K., 2019.
Research output: Contribution to conference › Paper › peer-review
Optimization of inclined angle magnetic sensor probe to improve detection performance of corrosion near the ground using extremely low-frequency eddy current testing
Wakabayashi, S., Hayashi, M., Saitoh, T., Sakai, K., Kiwa, T. & Tsukada, K., 2019.
Research output: Contribution to conference › Paper › peer-review
Volume estimation method of illegal dumping construction and demolition waste - A case study in Da Nang, Vietnam
Phuoc, N. T. V., Fujiwara, T. & Habuer, Nov 2019, p. 13. 1 p.
Research output: Contribution to conference › Paper
2018

A consciousness survey on Kurashiki canvas and design proposal
Fukumura, M., Turo, I. & Kimura, K., 2018.
Research output: Contribution to conference › Paper › peer-review
Decision support system for principal factors of grinding wheel using data-mining methodology
Kodama, H., Uotani, I. & Ohashi, K., 2018.
Research output: Contribution to conference › Paper › peer-review
Gasification and catalytic reforming of biomass waste - syngas formation and tar removal
Kawamoto, K., Jan 1 2018.
Research output: Contribution to conference › Paper › peer-review
Improving Japanese semantic-role-labeling performance with transfer learning as case for limited resources of tagged corpora on aggregated language
Okamura, T., Takeuchi, K., Ishihara, Y., Taguchi, M., Inada, Y., Iizukax, M., Abo, T. & Ueda, H., 2018, p. 503-512. 10 p.
Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus)
Instrumentally induced spurious polarization of a multi-layer half wave plate for a CMB polarization observation
Imada, H., Matsumura, T., Takaku, R., Patanchon, G., Ishino, H., Sakurai, Y., Komatsu, K. & Katayama, N., 2018, p. 61-67. 7 p.
Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus)
Laboratory experiments on initiation of rainfall-induced slope failure with moisture content measurements
Tohari, A., Nishigaki, M. & Komatsu, M., Jan 1 2018.
Research output: Contribution to conference › Paper › peer-review
Mass transfer characteristics of organic sorbent particles in a circular tube and circulating fluidized beds
Horibe, A., Yamada, Y. & Yamashita, K., 2018.
Research output: Contribution to conference › Paper › peer-review
Microspheres with dimple morphology of poly(p-oxyferuloyl) prepared by reaction-induced phase separation
Atarashi, H., Sugimoto, M., Yamazaki, S. & Kimura, K., 2018.
Research output: Contribution to conference › Paper › peer-review
Prototype demonstration of the broadband anti-reflection coating on sapphire using a sub-wavelength structure
Matsumura, T., Takaku, R., Hanany, S., Imada, H., Ishino, H., Katayama, N., Kobayashi, Y., Komatsu, K., Konishi, K., Kuwata-Gonokami, M., Nakamura, S., Sakurai, H., Sakurai, Y., Wen, Q., Young, K. & Yumoto, J., 2018, p. 54-60. 7 p.
Research output: Contribution to conference › Paper › peer-review
2 Citations (Scopus)
Study on concentric mutual lapping for improvement in sliding surface function of SiC ceramics
Tanimoto, Y., Koyama, H., Kodama, H. & Ohashi, K., 2018.
Research output: Contribution to conference › Paper › peer-review
2017
Abnormality diagnosis based on processing reaction force in deburring by rotary brush
Hatano, T., Nunobiki, M., Okuda, K. & Kodama, H., 2017, p. 673-678. 6 p.
Research output: Contribution to conference › Paper › peer-review
An ultra-precision cutting of carbon steel by diamond tool in co₂ atmosphere
Miyamoto, S., Okuda, K., Kodama, H. & Nunobiki, M., 2017, p. 339-346. 8 p.
Research output: Contribution to conference › Paper › peer-review
Cutting performance of boron-doped diamond coated tools in drilling of CFRP
Soldatov, A., Okada, A., Uemura, K. & Ogawa, H., Nov 13 2017.
Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus)
Development of intelligent cylindrical grinding system considering thermal deformation of workpiece
Onishi, T., Sakakura, M., Okanoue, T., Fujiyama, Y. & Ohashi, K., Nov 13 2017.
Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus)
Development of the grinding wheel decision support system using data mining method
Kodama, H., Okuda, K. & Ohashi, K., Nov 13 2017.
Research output: Contribution to conference › Paper › peer-review