Skip to main navigation Skip to search Skip to main content

A 3D Indoor Modelling Method Using 360° Panoramic Images and Its Application to CCTV Camera Placement Optimization

  • Anak Agung Surya Pradhana
  • , Nobuo Funabiki
  • , I. Nyoman Darma Kotama
  • , Kadek Suarjuna Batubulan
  • , Putu Sugiartawan

Research output: Contribution to journal › Article › peer-review

Abstract

Nowadays, closed-circuit television (CCTV) cameras are deployed worldwide to monitor movements of humans and other objects to improve the efficiency and safety of societies. Therefore, their proper placement is crucial for achieving effective surveillance coverage. Additionally, their proper placement is significantly important for maximizing visual coverage while reducing installation/management costs. For this task, digital twin is a useful technology, since it can simulate coverage and blind spots while freely changing camera locations. To implement digital twin, 3D modelling of a structure including a complex room is a key issue. In this paper, we propose a 3D indoor modelling method using 360° panoramic images and show its application to a CCTV camera placement optimization. This method constructs a structured 3D model of a target room from captured 360° panoramic images using a 3D Gaussian Splatting reconstruction method based on a visual simultaneous localization and mapping (VSLAM) framework. The Inertial Measurement Unit (IMU) is used together to improve the camera position estimation accuracy. The model construction is anchored using a GNSS/GPS reference to establish global spatial coordinates. As an application of the generated 3D model, optimal locations of a given number of CCTV cameras are determined by combining ray-casting visibility analysis and a greedy optimization algorithm in the virtual environment, maximizing visual coverage while minimizing blind spots and avoiding excessive overlap between camera views. For evaluations, we applied the proposed method to three rooms in Okayama University, Japan, and seven rooms in the Indonesian Institute of Business and Technology, Indonesia. After optimizing camera locations in the virtual environment, the cameras were actually installed in the rooms according to the recommended positions. The performance was evaluated using visibility coverage, blind spot reduction, and Root Mean Squared Error (RMSE) between the estimated and actual camera positions, where promising results were achieved.

Original languageEnglish
Article number3431
JournalSensors
Volume26
Issue number11
DOIs
Publication statusPublished - Jun 2026

Keywords

  • 360° panoramic image
  • 3D Gaussian splatting
  • 3D modelling
  • CCTV placement optimization
  • VSLAM
  • digital twin
  • greedy optimization
  • inertial measurement unit (IMU)
  • ray-casting visibility analysis

ASJC Scopus subject areas

  • Analytical Chemistry
  • Information Systems
  • Atomic and Molecular Physics, and Optics
  • Biochemistry
  • Instrumentation
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'A 3D Indoor Modelling Method Using 360° Panoramic Images and Its Application to CCTV Camera Placement Optimization'. Together they form a unique fingerprint.

Cite this