A Proposal of Hardware Channel Bonding for IEEE802.11N Wireless Network Using Raspberry PI

Rahardhita Widyatra Sudibyo; Nobuo Funabiki; Wen Chung Kao

doi:10.1109/ICCE-China.2018.8448498

A Proposal of Hardware Channel Bonding for IEEE802.11N Wireless Network Using Raspberry PI

Rahardhita Widyatra Sudibyo, Nobuo Funabiki, Wen Chung Kao

School of Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

Abstract

Raspberry Pi has become popular around the world as a small-size, low-cost, low-power, and high-performance computing device. It can be used as a software access-point for IEEE802.11n wireless local-area networks. Unfortunately, only the software channel bonding is available where two independent 20MHz channels are used together for each link. In this paper, we present the configuration of Raspberry Pi for the hardware channel bonding to increase the capacity with 40MHz bandwidth. Because the built-in wireless NIC does not support it, the external adapter with USB3.0 is used together. To verify the performance, we conducted throughput measurements in two scenarios.

Original language	English
Title of host publication	2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Print)	9781538663011
DOIs	https://doi.org/10.1109/ICCE-China.2018.8448498
Publication status	Published - Aug 27 2018
Event	5th IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018 - Taichung, Taiwan, Province of China Duration: May 19 2018 → May 21 2018

Publication series

Name	2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018

Other

Other	5th IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018
Country/Territory	Taiwan, Province of China
City	Taichung
Period	5/19/18 → 5/21/18

ASJC Scopus subject areas

Biomedical Engineering
Electrical and Electronic Engineering
Instrumentation

Access to Document

10.1109/ICCE-China.2018.8448498

Cite this

Sudibyo, R. W., Funabiki, N., & Kao, W. C. (2018). A Proposal of Hardware Channel Bonding for IEEE802.11N Wireless Network Using Raspberry PI. In 2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018 Article 8448498 (2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICCE-China.2018.8448498

A Proposal of Hardware Channel Bonding for IEEE802.11N Wireless Network Using Raspberry PI. / Sudibyo, Rahardhita Widyatra; Funabiki, Nobuo; Kao, Wen Chung.
2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018. Institute of Electrical and Electronics Engineers Inc., 2018. 8448498 (2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Sudibyo, RW, Funabiki, N & Kao, WC 2018, A Proposal of Hardware Channel Bonding for IEEE802.11N Wireless Network Using Raspberry PI. in 2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018., 8448498, 2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018, Institute of Electrical and Electronics Engineers Inc., 5th IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018, Taichung, Taiwan, Province of China, 5/19/18. https://doi.org/10.1109/ICCE-China.2018.8448498

Sudibyo RW, Funabiki N, Kao WC. A Proposal of Hardware Channel Bonding for IEEE802.11N Wireless Network Using Raspberry PI. In 2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018. Institute of Electrical and Electronics Engineers Inc. 2018. 8448498. (2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018). doi: 10.1109/ICCE-China.2018.8448498

Sudibyo, Rahardhita Widyatra ; Funabiki, Nobuo ; Kao, Wen Chung. / A Proposal of Hardware Channel Bonding for IEEE802.11N Wireless Network Using Raspberry PI. 2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018. Institute of Electrical and Electronics Engineers Inc., 2018. (2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018).

@inproceedings{01824595fbe741b49f82d0ee424f322d,

title = "A Proposal of Hardware Channel Bonding for IEEE802.11N Wireless Network Using Raspberry PI",

abstract = "Raspberry Pi has become popular around the world as a small-size, low-cost, low-power, and high-performance computing device. It can be used as a software access-point for IEEE802.11n wireless local-area networks. Unfortunately, only the software channel bonding is available where two independent 20MHz channels are used together for each link. In this paper, we present the configuration of Raspberry Pi for the hardware channel bonding to increase the capacity with 40MHz bandwidth. Because the built-in wireless NIC does not support it, the external adapter with USB3.0 is used together. To verify the performance, we conducted throughput measurements in two scenarios.",

author = "Sudibyo, {Rahardhita Widyatra} and Nobuo Funabiki and Kao, {Wen Chung}",

note = "Funding Information: ACKNOWLEDGMENTS This work is partially supported by JSPS KAKENHI (16K00127). Publisher Copyright: {\textcopyright} 2018 IEEE.; 5th IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018 ; Conference date: 19-05-2018 Through 21-05-2018",

year = "2018",

month = aug,

day = "27",

doi = "10.1109/ICCE-China.2018.8448498",

language = "English",

isbn = "9781538663011",

series = "2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018",

}

TY - GEN

T1 - A Proposal of Hardware Channel Bonding for IEEE802.11N Wireless Network Using Raspberry PI

AU - Sudibyo, Rahardhita Widyatra

AU - Funabiki, Nobuo

AU - Kao, Wen Chung

PY - 2018/8/27

Y1 - 2018/8/27

N2 - Raspberry Pi has become popular around the world as a small-size, low-cost, low-power, and high-performance computing device. It can be used as a software access-point for IEEE802.11n wireless local-area networks. Unfortunately, only the software channel bonding is available where two independent 20MHz channels are used together for each link. In this paper, we present the configuration of Raspberry Pi for the hardware channel bonding to increase the capacity with 40MHz bandwidth. Because the built-in wireless NIC does not support it, the external adapter with USB3.0 is used together. To verify the performance, we conducted throughput measurements in two scenarios.

AB - Raspberry Pi has become popular around the world as a small-size, low-cost, low-power, and high-performance computing device. It can be used as a software access-point for IEEE802.11n wireless local-area networks. Unfortunately, only the software channel bonding is available where two independent 20MHz channels are used together for each link. In this paper, we present the configuration of Raspberry Pi for the hardware channel bonding to increase the capacity with 40MHz bandwidth. Because the built-in wireless NIC does not support it, the external adapter with USB3.0 is used together. To verify the performance, we conducted throughput measurements in two scenarios.

UR - http://www.scopus.com/inward/record.url?scp=85053900401&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85053900401&partnerID=8YFLogxK

U2 - 10.1109/ICCE-China.2018.8448498

DO - 10.1109/ICCE-China.2018.8448498

M3 - Conference contribution

AN - SCOPUS:85053900401

SN - 9781538663011

T3 - 2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018

BT - 2018 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 5th IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2018

Y2 - 19 May 2018 through 21 May 2018

ER -

A Proposal of Hardware Channel Bonding for IEEE802.11N Wireless Network Using Raspberry PI

Abstract

Publication series

Other

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this