@article{0cb02af2933947ca8c2b0e67652786ba,
title = " Enhancement of Ultrahigh Rate Chargeability by Interfacial Nanodot BaTiO 3 Treatment on LiCoO 2 Cathode Thin Film Batteries ",
abstract = " Nanodot BaTiO 3 supported LiCoO 2 cathode thin films can dramatically improve high-rate chargeability and cyclability. The prepared BaTiO 3 nanodot is <3 nm in height and 35 nm in diameter, and its coverage is <5%. Supported by high dielectric constant materials on the surface of cathode materials, Li ion (Li + ) can intercalate through robust Li paths around the triple-phase interface consisting of the dielectric, cathode, and electrolyte. The current concentration around the triple-phase interface is observed by the finite element method and is in good agreement with the experimental data. The interfacial resistance between the cathode and electrolyte with nanodot BaTiO 3 is smaller than that without nanodot BaTiO 3 . The decomposition of the organic solvent electrolyte can prevent the fabrication of a solid electrolyte interface around the triple-phase interface. Li + paths may be created at non solid electrolyte interface covered regions by the strong current concentration originating from high dielectric constant materials on the cathode. Robust Li + paths lead to excellent chargeability and cyclability. ",
keywords = "BaTiO, Li-ion battery, cyclability, high-rate chargeability, thin-film battery",
author = "Sou Yasuhara and Shintaro Yasui and Takashi Teranishi and Keisuke Chajima and Yumi Yoshikawa and Yutaka Majima and Tomoyasu Taniyama and Mitsuru Itoh",
note = "Funding Information: This study was partially supported by JSPS KAKENHI Grants-in-Aid for young scientist (B) (Sh.Y., 15K18212), for scientific research (A) (M.I., 15H02292), for scientific research (B) (Ta.T., 15H04126, 18H01707), Challenging Research (Pioneering) (M.I., 17H06240) and (Exploratory) (Sh.Y., 18K19126, Ta.T., 16K14094), and MEXT Elements Strategy Initiative to form Core Research Center, Collaborative Research Project of Laboratory for Materials and Structures, Institute of Innovative Research, Tokyo Institute of Techonl-ogy and the BK Plus program, Basic Science Research program (NRF-2014R1A6A1030419) as well as the Hattori Hokokai Foundation and the Murata Science Foundation. We would like to thank Ms. M. Miyakawa for the technical support regarding SEM measurements and Dr. Hideki Hashimoto from Kogakuin University for the technical support regarding STEM measurements. Funding Information: This study was partially supported by JSPS KAKENHI Grants-in-Aid for young scientist (B) (Sh.Y., 15K18212), for scientific research (A) (M.I., 15H02292), for scientific research (B) (Ta.T. 15H04126, 18H01707), Challenging Research (Pioneering) (M.I., 17H06240) and (Exploratory) (Sh.Y., 18K19126, Ta.T., 16K14094), and MEXT Elements Strategy Initiative to form Core Research Center, Collaborative Research Project of Laboratory for Materials and Structures, Institute of Innovative Research, Tokyo Institute of Techonlogyand the BK Plus program Basic Science Research program (NRF-2014R1A6A1030419) as well as the Hattori Hokokai Foundation and the Murata Science Foundation. Publisher Copyright: {\textcopyright} 2019 American Chemical Society.",
year = "2019",
month = mar,
day = "13",
doi = "10.1021/acs.nanolett.8b04690",
language = "English",
volume = "19",
pages = "1688--1694",
journal = "Nano Letters",
issn = "1530-6984",
publisher = "American Chemical Society",
number = "3",
}