Fabrication of NdGaO3 buffer layer on textured Ni tape for long length coated conductors

S. B. Kim; T. Maeda; Y. Yamada; T. Suga; K. Matsumoto; T. Watanabe; I. Hirabayashi

doi:10.1109/77.919772

Fabrication of NdGaO₃ buffer layer on textured Ni tape for long length coated conductors

S. B. Kim, T. Maeda, Y. Yamada, T. Suga, K. Matsumoto, T. Watanabe, I. Hirabayashi

Research output: Contribution to journal › Conference article › peer-review

3 Citations (Scopus)

Abstract

Biaxially aligned NdGaO₃ (NGO) layers were successfully fabricated on the single crystalline substrates (STO, LAO and NiO/STO) and metallic substrate (NiO/Ni) by pulsed laser deposition (PLD) method and post-annealing process. And also, the good biaxial orientation YBa₂Cu₃O_7-δ (YBCO) films on NGO layers were deposited by liquid phase epitaxy (LPE) method. From this work, it has been proved for the first time that NGO thin film can be used as a seed layer for the YBCO thick film deposition by LPE method. And it is clear that the NGO thin film growth process, where biaxially orientated films were deposited using PLD at room temperature followed by simple post-annealing process, is very effective for the uniform long length coated conductor production.

Original language	English
Pages (from-to)	3317-3320
Number of pages	4
Journal	IEEE Transactions on Applied Superconductivity
Volume	11
Issue number	1 III
DOIs	https://doi.org/10.1109/77.919772
Publication status	Published - Mar 2001
Externally published	Yes
Event	2000 Applied Superconductivity Conference - Virginia Beach, VA, United States Duration: Sept 17 2000 → Sept 22 2000

Keywords

LPE process
LaNiO buffer layer
NdGaO seed layer
PLD process
YBCO film

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Condensed Matter Physics
Electrical and Electronic Engineering

Access to Document

10.1109/77.919772

Cite this

@article{a067e9c29ad64ef2ae7dcda7de115e81,

title = "Fabrication of NdGaO3 buffer layer on textured Ni tape for long length coated conductors",

abstract = "Biaxially aligned NdGaO3 (NGO) layers were successfully fabricated on the single crystalline substrates (STO, LAO and NiO/STO) and metallic substrate (NiO/Ni) by pulsed laser deposition (PLD) method and post-annealing process. And also, the good biaxial orientation YBa2Cu3O7-δ (YBCO) films on NGO layers were deposited by liquid phase epitaxy (LPE) method. From this work, it has been proved for the first time that NGO thin film can be used as a seed layer for the YBCO thick film deposition by LPE method. And it is clear that the NGO thin film growth process, where biaxially orientated films were deposited using PLD at room temperature followed by simple post-annealing process, is very effective for the uniform long length coated conductor production.",

keywords = "LPE process, LaNiO buffer layer, NdGaO seed layer, PLD process, YBCO film",

author = "Kim, {S. B.} and T. Maeda and Y. Yamada and T. Suga and K. Matsumoto and T. Watanabe and I. Hirabayashi",

note = "Funding Information: Manuscript received September 19,2000. This work was supported by the New Energy and Industrial Technology De- velopment Organization (NEDO) as Collaborative Research and Development of Fundamental Technologies for Superconductivity Applications under the New Sunshine Program Administered by the Agency of Industrial Science and Technology (AIST) ofthe Ministry of International Trade and Industry (MITI) of Japan. S.B. Kim, T. Maeda, Y. Yamada, T. Suga and I. Hirabayashi are with the Superconductivity Research Laboratory-ISTEC, Nagoya, Japan (e-mail: sbkim@istec.or.jp) T. Watanabe is with The Furukawa Electric, Nikko, Japan. K. Matsumoto was with The Furukawa Electric, Nikko, Japan. He is now with the Department of Materials Science and Engineering, Kyoto University, Kyoto, Japan (e-mail: matsu@hightc.mtl.kyoto-u.ac.jp); 2000 Applied Superconductivity Conference ; Conference date: 17-09-2000 Through 22-09-2000",

year = "2001",

month = mar,

doi = "10.1109/77.919772",

language = "English",

volume = "11",

pages = "3317--3320",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "1 III",

}

TY - JOUR

T1 - Fabrication of NdGaO3 buffer layer on textured Ni tape for long length coated conductors

AU - Kim, S. B.

AU - Maeda, T.

AU - Yamada, Y.

AU - Suga, T.

AU - Matsumoto, K.

AU - Watanabe, T.

AU - Hirabayashi, I.

N1 - Funding Information: Manuscript received September 19,2000. This work was supported by the New Energy and Industrial Technology De- velopment Organization (NEDO) as Collaborative Research and Development of Fundamental Technologies for Superconductivity Applications under the New Sunshine Program Administered by the Agency of Industrial Science and Technology (AIST) ofthe Ministry of International Trade and Industry (MITI) of Japan. S.B. Kim, T. Maeda, Y. Yamada, T. Suga and I. Hirabayashi are with the Superconductivity Research Laboratory-ISTEC, Nagoya, Japan (e-mail: sbkim@istec.or.jp) T. Watanabe is with The Furukawa Electric, Nikko, Japan. K. Matsumoto was with The Furukawa Electric, Nikko, Japan. He is now with the Department of Materials Science and Engineering, Kyoto University, Kyoto, Japan (e-mail: matsu@hightc.mtl.kyoto-u.ac.jp)

PY - 2001/3

Y1 - 2001/3

N2 - Biaxially aligned NdGaO3 (NGO) layers were successfully fabricated on the single crystalline substrates (STO, LAO and NiO/STO) and metallic substrate (NiO/Ni) by pulsed laser deposition (PLD) method and post-annealing process. And also, the good biaxial orientation YBa2Cu3O7-δ (YBCO) films on NGO layers were deposited by liquid phase epitaxy (LPE) method. From this work, it has been proved for the first time that NGO thin film can be used as a seed layer for the YBCO thick film deposition by LPE method. And it is clear that the NGO thin film growth process, where biaxially orientated films were deposited using PLD at room temperature followed by simple post-annealing process, is very effective for the uniform long length coated conductor production.

AB - Biaxially aligned NdGaO3 (NGO) layers were successfully fabricated on the single crystalline substrates (STO, LAO and NiO/STO) and metallic substrate (NiO/Ni) by pulsed laser deposition (PLD) method and post-annealing process. And also, the good biaxial orientation YBa2Cu3O7-δ (YBCO) films on NGO layers were deposited by liquid phase epitaxy (LPE) method. From this work, it has been proved for the first time that NGO thin film can be used as a seed layer for the YBCO thick film deposition by LPE method. And it is clear that the NGO thin film growth process, where biaxially orientated films were deposited using PLD at room temperature followed by simple post-annealing process, is very effective for the uniform long length coated conductor production.

KW - LPE process

KW - LaNiO buffer layer

KW - NdGaO seed layer

KW - PLD process

KW - YBCO film

UR - http://www.scopus.com/inward/record.url?scp=0035268386&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035268386&partnerID=8YFLogxK

U2 - 10.1109/77.919772

DO - 10.1109/77.919772

M3 - Conference article

AN - SCOPUS:0035268386

SN - 1051-8223

VL - 11

SP - 3317

EP - 3320

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

IS - 1 III

T2 - 2000 Applied Superconductivity Conference

Y2 - 17 September 2000 through 22 September 2000

ER -