Flame Quenching and Unburned Hydrocarbons on the Wall of a Spherical Combustion Vessel

Eiji Tomita, Yoshisuke Hamamoto, Toshio Nakata

    Research output: Contribution to journalArticlepeer-review

    3 Citations (Scopus)

    Abstract

    An experimental study on one-dimensional, laminar flame quenching on a cold wall was described herein. A homogeneous mixture of propane-air was ignited at the center of a spherical vessel, and the effects of pressure, mixture ratio and vessel size on the heat flux to the wall and on the unburned hydrocarbon concentrations were investigated. The characteristic values of quenching layer thickness defined from the maximum heat flux and the unburned hydrocarbon concentrations, δq and δHC, respectively, were determined. The value of δq was proportional to about minus 0.45 of the power of the pressure and was independent of the mixture ratio and the size of the combustion vessel. It was recognized that in the large size vessel, the hydrocarbons in the quench layer after the completion of combustion with flame propagation were oxidized. The value ofδHC obtained in the small size vessel was proportional to δq.

    Original languageEnglish
    Pages (from-to)1108-1116
    Number of pages9
    JournalTransactions of the Japan Society of Mechanical Engineers Series B
    Volume53
    Issue number487
    DOIs
    Publication statusPublished - 1987

    Keywords

    • Combustion
    • Flame Quenching
    • Heat Flux
    • Internal Combustion Engine
    • Quenching Layer
    • Unburned Hydrocarbon

    ASJC Scopus subject areas

    • Condensed Matter Physics
    • Mechanical Engineering

    Fingerprint

    Dive into the research topics of 'Flame Quenching and Unburned Hydrocarbons on the Wall of a Spherical Combustion Vessel'. Together they form a unique fingerprint.

    Cite this