Measurements of electron beam emittance in the Accelerator Test Facility damping ring operated in multibunch modes

Yosuke Honda; Noboru Sasao; Sakae Araki; Hitoshi Hayano; Yasuo Higashi; Kiyoshi Kubo; Toshiyuki Okugi; Takashi Taniguchi; Nobuhiro Terunuma; Junji Urakawa; Yoshio Yamazaki; Koichiro Hirano; Masahiro Nomura; Mikio Takano; Hiroshi Sakai

doi:10.1103/PhysRevSTAB.6.092802

Measurements of electron beam emittance in the Accelerator Test Facility damping ring operated in multibunch modes

Yosuke Honda, Noboru Sasao, Sakae Araki, Hitoshi Hayano, Yasuo Higashi, Kiyoshi Kubo, Toshiyuki Okugi, Takashi Taniguchi, Nobuhiro Terunuma, Junji Urakawa, Yoshio Yamazaki, Koichiro Hirano, Masahiro Nomura, Mikio Takano, Hiroshi Sakai

Research output: Contribution to journal › Article › peer-review

15 Citations (Scopus)

Abstract

We present the measurement results of electron beam emittance in the Accelerator Test Facility damping ring operated in multibunch modes. The measurements were carried out with an upgraded laser wire beam profile monitor. The monitor has now a vertical wire as well as a horizontal one and is able to make much faster measurements thanks to an increased effective laser power inside the cavity. The measured emittance shows no large bunch-to-bunch dependence in either the horizontal or vertical directions. The values of the vertical emittance are similar to those obtained in the single-bunch operation. The present results are an important step toward the realization of a high-energy linear collider.

Original language	English
Article number	092802
Pages (from-to)	50-57
Number of pages	8
Journal	Physical Review Special Topics - Accelerators and Beams
Volume	6
Issue number	9
DOIs	https://doi.org/10.1103/PhysRevSTAB.6.092802
Publication status	Published - 2003
Externally published	Yes

ASJC Scopus subject areas

Nuclear and High Energy Physics
Physics and Astronomy (miscellaneous)
Surfaces and Interfaces

Access to Document

10.1103/PhysRevSTAB.6.092802

Cite this

Honda, Y., Sasao, N., Araki, S., Hayano, H., Higashi, Y., Kubo, K., Okugi, T., Taniguchi, T., Terunuma, N., Urakawa, J., Yamazaki, Y., Hirano, K., Nomura, M., Takano, M., & Sakai, H. (2003). Measurements of electron beam emittance in the Accelerator Test Facility damping ring operated in multibunch modes. Physical Review Special Topics - Accelerators and Beams, 6(9), 50-57. Article 092802. https://doi.org/10.1103/PhysRevSTAB.6.092802

Honda, Y, Sasao, N, Araki, S, Hayano, H, Higashi, Y, Kubo, K, Okugi, T, Taniguchi, T, Terunuma, N, Urakawa, J, Yamazaki, Y, Hirano, K, Nomura, M, Takano, M & Sakai, H 2003, 'Measurements of electron beam emittance in the Accelerator Test Facility damping ring operated in multibunch modes', Physical Review Special Topics - Accelerators and Beams, vol. 6, no. 9, 092802, pp. 50-57. https://doi.org/10.1103/PhysRevSTAB.6.092802

@article{9c96891ffe1e455c9b673dc186e9d67e,

title = "Measurements of electron beam emittance in the Accelerator Test Facility damping ring operated in multibunch modes",

abstract = "We present the measurement results of electron beam emittance in the Accelerator Test Facility damping ring operated in multibunch modes. The measurements were carried out with an upgraded laser wire beam profile monitor. The monitor has now a vertical wire as well as a horizontal one and is able to make much faster measurements thanks to an increased effective laser power inside the cavity. The measured emittance shows no large bunch-to-bunch dependence in either the horizontal or vertical directions. The values of the vertical emittance are similar to those obtained in the single-bunch operation. The present results are an important step toward the realization of a high-energy linear collider.",

author = "Yosuke Honda and Noboru Sasao and Sakae Araki and Hitoshi Hayano and Yasuo Higashi and Kiyoshi Kubo and Toshiyuki Okugi and Takashi Taniguchi and Nobuhiro Terunuma and Junji Urakawa and Yoshio Yamazaki and Koichiro Hirano and Masahiro Nomura and Mikio Takano and Hiroshi Sakai",

note = "Funding Information: We would like to thank all members of the ATF group for their helpful support. We are also grateful to Dr. M. Ross and Dr. J. Frisch for their useful discussions with our laser wire experiment. It is our pleasure to thank Professor H. Sugawara, Professor M. Kihara, Professor Y. Kimura, Professor S. Iwata, and Professor K. Takata for their support and encouragement. This research was partially supported by Grant-in-Aid Scientific Research (1344078) from the Ministry of Education, Science, Sports and Culture of Japan and the Advanced Com?>pact Accelerator Project of the National Institute of Radiological Science.",

year = "2003",

doi = "10.1103/PhysRevSTAB.6.092802",

language = "English",

volume = "6",

pages = "50--57",

journal = "Physical Review Special Topics - Accelerators and Beams",

issn = "1098-4402",

publisher = "American Physical Society",

number = "9",

}

TY - JOUR

T1 - Measurements of electron beam emittance in the Accelerator Test Facility damping ring operated in multibunch modes

AU - Honda, Yosuke

AU - Sasao, Noboru

AU - Araki, Sakae

AU - Hayano, Hitoshi

AU - Higashi, Yasuo

AU - Kubo, Kiyoshi

AU - Okugi, Toshiyuki

AU - Taniguchi, Takashi

AU - Terunuma, Nobuhiro

AU - Urakawa, Junji

AU - Yamazaki, Yoshio

AU - Hirano, Koichiro

AU - Nomura, Masahiro

AU - Takano, Mikio

AU - Sakai, Hiroshi

N1 - Funding Information: We would like to thank all members of the ATF group for their helpful support. We are also grateful to Dr. M. Ross and Dr. J. Frisch for their useful discussions with our laser wire experiment. It is our pleasure to thank Professor H. Sugawara, Professor M. Kihara, Professor Y. Kimura, Professor S. Iwata, and Professor K. Takata for their support and encouragement. This research was partially supported by Grant-in-Aid Scientific Research (1344078) from the Ministry of Education, Science, Sports and Culture of Japan and the Advanced Com?>pact Accelerator Project of the National Institute of Radiological Science.

PY - 2003

Y1 - 2003

N2 - We present the measurement results of electron beam emittance in the Accelerator Test Facility damping ring operated in multibunch modes. The measurements were carried out with an upgraded laser wire beam profile monitor. The monitor has now a vertical wire as well as a horizontal one and is able to make much faster measurements thanks to an increased effective laser power inside the cavity. The measured emittance shows no large bunch-to-bunch dependence in either the horizontal or vertical directions. The values of the vertical emittance are similar to those obtained in the single-bunch operation. The present results are an important step toward the realization of a high-energy linear collider.

AB - We present the measurement results of electron beam emittance in the Accelerator Test Facility damping ring operated in multibunch modes. The measurements were carried out with an upgraded laser wire beam profile monitor. The monitor has now a vertical wire as well as a horizontal one and is able to make much faster measurements thanks to an increased effective laser power inside the cavity. The measured emittance shows no large bunch-to-bunch dependence in either the horizontal or vertical directions. The values of the vertical emittance are similar to those obtained in the single-bunch operation. The present results are an important step toward the realization of a high-energy linear collider.

UR - http://www.scopus.com/inward/record.url?scp=18244410400&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=18244410400&partnerID=8YFLogxK

U2 - 10.1103/PhysRevSTAB.6.092802

DO - 10.1103/PhysRevSTAB.6.092802

M3 - Article

AN - SCOPUS:18244410400

SN - 1098-4402

VL - 6

SP - 50

EP - 57

JO - Physical Review Special Topics - Accelerators and Beams

JF - Physical Review Special Topics - Accelerators and Beams

IS - 9

M1 - 092802

ER -

Measurements of electron beam emittance in the Accelerator Test Facility damping ring operated in multibunch modes

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this