Non-cuprate thin films as candidates of seed layer for liquid phase epitaxy process

Tadamasa Miura; Yasuji Yamada; Toshihiro Suga; Daxiang Huang; Seok Beom Kim; Toshihiko Maeda; Izumi Hirabayashi; Hiroshi Ikuta; Uichiro Mizutani

doi:10.1016/S0921-4534(01)00465-8

Non-cuprate thin films as candidates of seed layer for liquid phase epitaxy process

Tadamasa Miura, Yasuji Yamada, Toshihiro Suga, Daxiang Huang, Seok Beom Kim, Toshihiko Maeda, Izumi Hirabayashi, Hiroshi Ikuta, Uichiro Mizutani

Research output: Contribution to journal › Article › peer-review

Abstract

As a seed layer for the liquid phase epitaxy (LPE) of YBa₂Cu₃O_7-d (YBCO) we investigate non-cuprate thin film of Y-Ba-Fe-O deposited by pulsed laser deposition (PLD) method. The deposited film is highly oriented and it can be used as a seed layer at LPE temperatures below 980°C. PLD conditions for obtaining crystalline Y-Ba-Fe-O film is much wider than that for the seed layer of YBCO. LPE-grown YBCO film formed on the Y-Ba-Fe-O seed layer shows the same superconductive properties as that formed on the YBCO seed layer.

Original language	English
Pages (from-to)	983-986
Number of pages	4
Journal	Physica C: Superconductivity and its applications
Volume	357-360
DOIs	https://doi.org/10.1016/S0921-4534(01)00465-8
Publication status	Published - 2001
Externally published	Yes

Keywords

Buffer layer
Liquid phase epitaxy
Thin film
Y-Ba-Fe-O
YBaCuO

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Condensed Matter Physics
Energy Engineering and Power Technology
Electrical and Electronic Engineering

Access to Document

10.1016/S0921-4534(01)00465-8

Cite this

@article{28ffbddbbf944085affa7a624acbe457,

title = "Non-cuprate thin films as candidates of seed layer for liquid phase epitaxy process",

abstract = "As a seed layer for the liquid phase epitaxy (LPE) of YBa2Cu3O7-d (YBCO) we investigate non-cuprate thin film of Y-Ba-Fe-O deposited by pulsed laser deposition (PLD) method. The deposited film is highly oriented and it can be used as a seed layer at LPE temperatures below 980°C. PLD conditions for obtaining crystalline Y-Ba-Fe-O film is much wider than that for the seed layer of YBCO. LPE-grown YBCO film formed on the Y-Ba-Fe-O seed layer shows the same superconductive properties as that formed on the YBCO seed layer.",

keywords = "Buffer layer, Liquid phase epitaxy, Thin film, Y-Ba-Fe-O, YBaCuO",

author = "Tadamasa Miura and Yasuji Yamada and Toshihiro Suga and Daxiang Huang and Kim, {Seok Beom} and Toshihiko Maeda and Izumi Hirabayashi and Hiroshi Ikuta and Uichiro Mizutani",

note = "Funding Information: This work was supported by the New Energy and Industrial Technology Development Organization (NEDO) as Collaborative Research and Development of Fundamental Technologies for Superconductivity Applications.",

year = "2001",

doi = "10.1016/S0921-4534(01)00465-8",

language = "English",

volume = "357-360",

pages = "983--986",

journal = "Physica C: Superconductivity and its Applications",

issn = "0921-4534",

publisher = "Elsevier",

}

TY - JOUR

T1 - Non-cuprate thin films as candidates of seed layer for liquid phase epitaxy process

AU - Miura, Tadamasa

AU - Yamada, Yasuji

AU - Suga, Toshihiro

AU - Huang, Daxiang

AU - Kim, Seok Beom

AU - Maeda, Toshihiko

AU - Hirabayashi, Izumi

AU - Ikuta, Hiroshi

AU - Mizutani, Uichiro

N1 - Funding Information: This work was supported by the New Energy and Industrial Technology Development Organization (NEDO) as Collaborative Research and Development of Fundamental Technologies for Superconductivity Applications.

PY - 2001

Y1 - 2001

N2 - As a seed layer for the liquid phase epitaxy (LPE) of YBa2Cu3O7-d (YBCO) we investigate non-cuprate thin film of Y-Ba-Fe-O deposited by pulsed laser deposition (PLD) method. The deposited film is highly oriented and it can be used as a seed layer at LPE temperatures below 980°C. PLD conditions for obtaining crystalline Y-Ba-Fe-O film is much wider than that for the seed layer of YBCO. LPE-grown YBCO film formed on the Y-Ba-Fe-O seed layer shows the same superconductive properties as that formed on the YBCO seed layer.

AB - As a seed layer for the liquid phase epitaxy (LPE) of YBa2Cu3O7-d (YBCO) we investigate non-cuprate thin film of Y-Ba-Fe-O deposited by pulsed laser deposition (PLD) method. The deposited film is highly oriented and it can be used as a seed layer at LPE temperatures below 980°C. PLD conditions for obtaining crystalline Y-Ba-Fe-O film is much wider than that for the seed layer of YBCO. LPE-grown YBCO film formed on the Y-Ba-Fe-O seed layer shows the same superconductive properties as that formed on the YBCO seed layer.

KW - Buffer layer

KW - Liquid phase epitaxy

KW - Thin film

KW - Y-Ba-Fe-O

KW - YBaCuO

UR - http://www.scopus.com/inward/record.url?scp=0035451216&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035451216&partnerID=8YFLogxK

U2 - 10.1016/S0921-4534(01)00465-8

DO - 10.1016/S0921-4534(01)00465-8

M3 - Article

AN - SCOPUS:0035451216

SN - 0921-4534

VL - 357-360

SP - 983

EP - 986

JO - Physica C: Superconductivity and its Applications

JF - Physica C: Superconductivity and its Applications

ER -

Non-cuprate thin films as candidates of seed layer for liquid phase epitaxy process

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this