Prediction of the common-mode radiated emission from the board to board interconnection through common-mode antenna model

Makoto Torigoe; Akifumi Sadatoshi; Yoshitaka Toyota; Kengo Iokibe; Ruji Koga; Tetsushi Watanabe; Osami Wada

doi:10.1109/ISEMC.2008.4652094

Prediction of the common-mode radiated emission from the board to board interconnection through common-mode antenna model

Makoto Torigoe, Akifumi Sadatoshi, Yoshitaka Toyota, Kengo Iokibe, Ruji Koga, Tetsushi Watanabe, Osami Wada

Research output: Contribution to journal › Conference article › peer-review

5 Citations (Scopus)

Abstract

In this paper, the common-mode antenna model, which can estimate the amount of common-mode radiation quickly and accurately, was applied to a board-to-board interconnection structure with a connector. The inductor model is introduced as the connector model for improving accuracy of the common-mode antenna model. By using the inductance, which was calculated with the commercial electromagnetic field simulator, the radiated emissions estimated by the model agreed with the measurement results within an error of 3 dB around the peak emission levels.

Original language	English
Article number	4652094
Journal	IEEE International Symposium on Electromagnetic Compatibility
Volume	2008-January
DOIs	https://doi.org/10.1109/ISEMC.2008.4652094
Publication status	Published - Jan 1 2008
Event	2008 IEEE International Symposium on Electromagnetic Compatibility, EMC 2008 - Detroit, MI, Germany Duration: Aug 18 2008 → Aug 22 2008

Keywords

Common-mode antenna model
Common-mode radiation
Connector
Printed circuit board

ASJC Scopus subject areas

Condensed Matter Physics
Electrical and Electronic Engineering

Access to Document

10.1109/ISEMC.2008.4652094

Cite this

Prediction of the common-mode radiated emission from the board to board interconnection through common-mode antenna model. / Torigoe, Makoto; Sadatoshi, Akifumi; Toyota, Yoshitaka et al.
In: IEEE International Symposium on Electromagnetic Compatibility, Vol. 2008-January, 4652094, 01.01.2008.

Research output: Contribution to journal › Conference article › peer-review

@article{0372fce951fa4061b095d4ffe438ee5a,

title = "Prediction of the common-mode radiated emission from the board to board interconnection through common-mode antenna model",

abstract = "In this paper, the common-mode antenna model, which can estimate the amount of common-mode radiation quickly and accurately, was applied to a board-to-board interconnection structure with a connector. The inductor model is introduced as the connector model for improving accuracy of the common-mode antenna model. By using the inductance, which was calculated with the commercial electromagnetic field simulator, the radiated emissions estimated by the model agreed with the measurement results within an error of 3 dB around the peak emission levels.",

keywords = "Common-mode antenna model, Common-mode radiation, Connector, Printed circuit board",

author = "Makoto Torigoe and Akifumi Sadatoshi and Yoshitaka Toyota and Kengo Iokibe and Ruji Koga and Tetsushi Watanabe and Osami Wada",

year = "2008",

month = jan,

day = "1",

doi = "10.1109/ISEMC.2008.4652094",

language = "English",

volume = "2008-January",

journal = "IEEE International Symposium on Electromagnetic Compatibility",

issn = "1077-4076",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

note = "2008 IEEE International Symposium on Electromagnetic Compatibility, EMC 2008 ; Conference date: 18-08-2008 Through 22-08-2008",

}

TY - JOUR

T1 - Prediction of the common-mode radiated emission from the board to board interconnection through common-mode antenna model

AU - Torigoe, Makoto

AU - Sadatoshi, Akifumi

AU - Toyota, Yoshitaka

AU - Iokibe, Kengo

AU - Koga, Ruji

AU - Watanabe, Tetsushi

AU - Wada, Osami

PY - 2008/1/1

Y1 - 2008/1/1

N2 - In this paper, the common-mode antenna model, which can estimate the amount of common-mode radiation quickly and accurately, was applied to a board-to-board interconnection structure with a connector. The inductor model is introduced as the connector model for improving accuracy of the common-mode antenna model. By using the inductance, which was calculated with the commercial electromagnetic field simulator, the radiated emissions estimated by the model agreed with the measurement results within an error of 3 dB around the peak emission levels.

AB - In this paper, the common-mode antenna model, which can estimate the amount of common-mode radiation quickly and accurately, was applied to a board-to-board interconnection structure with a connector. The inductor model is introduced as the connector model for improving accuracy of the common-mode antenna model. By using the inductance, which was calculated with the commercial electromagnetic field simulator, the radiated emissions estimated by the model agreed with the measurement results within an error of 3 dB around the peak emission levels.

KW - Common-mode antenna model

KW - Common-mode radiation

KW - Connector

KW - Printed circuit board

UR - http://www.scopus.com/inward/record.url?scp=84931863266&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84931863266&partnerID=8YFLogxK

U2 - 10.1109/ISEMC.2008.4652094

DO - 10.1109/ISEMC.2008.4652094

M3 - Conference article

AN - SCOPUS:84931863266

SN - 1077-4076

VL - 2008-January

JO - IEEE International Symposium on Electromagnetic Compatibility

JF - IEEE International Symposium on Electromagnetic Compatibility

M1 - 4652094

T2 - 2008 IEEE International Symposium on Electromagnetic Compatibility, EMC 2008

Y2 - 18 August 2008 through 22 August 2008

ER -

Prediction of the common-mode radiated emission from the board to board interconnection through common-mode antenna model

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this