Rewriting of low electrical resistance lines on TiO                         2                          film by writing and erasing with femtosecond and CW fiber lasers

Masahiro Tsukamoto; Ryosuke Nishii; Yu Muraki; Togo Shinonaga; Minoru Yoshida; Masanari Takahashi; Nobuyuki Abe

doi:10.1016/j.apsusc.2014.06.062

Rewriting of low electrical resistance lines on TiO ₂ film by writing and erasing with femtosecond and CW fiber lasers

Masahiro Tsukamoto
, Ryosuke Nishii
, Yu Muraki
, Togo Shinonaga
, Minoru Yoshida
, Masanari Takahashi
, Nobuyuki Abe

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Abstract

A rewriting process was developed for reduced electrical resistance lines on a titanium dioxide (TiO ₂ ) film with femtosecond and CW fiber lasers. In this process, lines are written on TiO ₂ film by femtosecond laser irradiation, where the lines have a lower electrical resistance than the surrounding film. By heating with a CW fiber laser in air, the low electrical resistance lines are erased and their electrical resistances increase. When the erased areas on the TiO ₂ film are irradiated with the femtosecond laser, the lower electrical resistance lines can be rewritten on the film surface.

Original language	English
Pages (from-to)	730-735
Number of pages	6
Journal	Applied Surface Science
Volume	313
DOIs	https://doi.org/10.1016/j.apsusc.2014.06.062
Publication status	Published - Sept 15 2014
Externally published	Yes

Keywords

Aerosol beam
CW fiber laser
Femtosecond laser
Lower electrical resistance line
Titanium dioxide

ASJC Scopus subject areas

Condensed Matter Physics
Surfaces, Coatings and Films
Surfaces and Interfaces

Access to Document

10.1016/j.apsusc.2014.06.062

Cite this

Tsukamoto, M., Nishii, R., Muraki, Y., Shinonaga, T., Yoshida, M., Takahashi, M., & Abe, N. (2014). Rewriting of low electrical resistance lines on TiO ₂ film by writing and erasing with femtosecond and CW fiber lasers Applied Surface Science, 313, 730-735. https://doi.org/10.1016/j.apsusc.2014.06.062

Rewriting of low electrical resistance lines on TiO ₂ film by writing and erasing with femtosecond and CW fiber lasers . / Tsukamoto, Masahiro; Nishii, Ryosuke; Muraki, Yu et al.
In: Applied Surface Science, Vol. 313, 15.09.2014, p. 730-735.

Research output: Contribution to journal › Article › peer-review

Tsukamoto, M, Nishii, R, Muraki, Y, Shinonaga, T, Yoshida, M, Takahashi, M & Abe, N 2014, ' Rewriting of low electrical resistance lines on TiO ₂ film by writing and erasing with femtosecond and CW fiber lasers ', Applied Surface Science, vol. 313, pp. 730-735. https://doi.org/10.1016/j.apsusc.2014.06.062

Tsukamoto M, Nishii R, Muraki Y, Shinonaga T, Yoshida M, Takahashi M et al. Rewriting of low electrical resistance lines on TiO ₂ film by writing and erasing with femtosecond and CW fiber lasers Applied Surface Science. 2014 Sept 15;313:730-735. doi: 10.1016/j.apsusc.2014.06.062

@article{204a0bb41cba4471a73e1ee92f56cbf0,

title = " Rewriting of low electrical resistance lines on TiO 2 film by writing and erasing with femtosecond and CW fiber lasers ",

abstract = " A rewriting process was developed for reduced electrical resistance lines on a titanium dioxide (TiO 2 ) film with femtosecond and CW fiber lasers. In this process, lines are written on TiO 2 film by femtosecond laser irradiation, where the lines have a lower electrical resistance than the surrounding film. By heating with a CW fiber laser in air, the low electrical resistance lines are erased and their electrical resistances increase. When the erased areas on the TiO 2 film are irradiated with the femtosecond laser, the lower electrical resistance lines can be rewritten on the film surface.",

keywords = "Aerosol beam, CW fiber laser, Femtosecond laser, Lower electrical resistance line, Titanium dioxide",

author = "Masahiro Tsukamoto and Ryosuke Nishii and Yu Muraki and Togo Shinonaga and Minoru Yoshida and Masanari Takahashi and Nobuyuki Abe",

year = "2014",

month = sep,

day = "15",

doi = "10.1016/j.apsusc.2014.06.062",

language = "English",

volume = "313",

pages = "730--735",

journal = "Applied Surface Science",

issn = "0169-4332",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Rewriting of low electrical resistance lines on TiO 2 film by writing and erasing with femtosecond and CW fiber lasers

AU - Tsukamoto, Masahiro

AU - Nishii, Ryosuke

AU - Muraki, Yu

AU - Shinonaga, Togo

AU - Yoshida, Minoru

AU - Takahashi, Masanari

AU - Abe, Nobuyuki

PY - 2014/9/15

Y1 - 2014/9/15

N2 - A rewriting process was developed for reduced electrical resistance lines on a titanium dioxide (TiO 2 ) film with femtosecond and CW fiber lasers. In this process, lines are written on TiO 2 film by femtosecond laser irradiation, where the lines have a lower electrical resistance than the surrounding film. By heating with a CW fiber laser in air, the low electrical resistance lines are erased and their electrical resistances increase. When the erased areas on the TiO 2 film are irradiated with the femtosecond laser, the lower electrical resistance lines can be rewritten on the film surface.

AB - A rewriting process was developed for reduced electrical resistance lines on a titanium dioxide (TiO 2 ) film with femtosecond and CW fiber lasers. In this process, lines are written on TiO 2 film by femtosecond laser irradiation, where the lines have a lower electrical resistance than the surrounding film. By heating with a CW fiber laser in air, the low electrical resistance lines are erased and their electrical resistances increase. When the erased areas on the TiO 2 film are irradiated with the femtosecond laser, the lower electrical resistance lines can be rewritten on the film surface.

KW - Aerosol beam

KW - CW fiber laser

KW - Femtosecond laser

KW - Lower electrical resistance line

KW - Titanium dioxide

UR - https://www.scopus.com/pages/publications/84904805233

UR - https://www.scopus.com/pages/publications/84904805233#tab=citedBy

U2 - 10.1016/j.apsusc.2014.06.062

DO - 10.1016/j.apsusc.2014.06.062

M3 - Article

AN - SCOPUS:84904805233

SN - 0169-4332

VL - 313

SP - 730

EP - 735

JO - Applied Surface Science

JF - Applied Surface Science

ER -