TY - JOUR
T1 - Synthesis and characterization of a polyoxometalate-based ionic liquid catalyst for delignification of wood biomass
AU - Ozdokur, Kemal Volkan
AU - Moniruzzaman, Muhammad
AU - Yanik, Jale
AU - Ono, Tsutomu
N1 - Funding Information:
This study was supported by the European Union Project “Biofuels from Solid Wastes” (Project No: PIRSES GA-2009-217550).
Publisher Copyright:
© 2016, Springer-Verlag Berlin Heidelberg.
PY - 2016/11/1
Y1 - 2016/11/1
N2 - Conversion of recalcitrant lignocellulosic biomass to renewable and valuable biopolymers has attracted global interest to build up sustainable societies. Delignification of biomass for separating such biopolymers (e.g., cellulose and lignin) has been used as an efficient process. However, conventional delignification methods suffer from considerable drawbacks and cannot be considered as clean processes. In this study, a new type of polyoxometalate (POM) ionic liquid (IL), [(C6N2H11)42][Mo132O372 (CH3COO)30(H2O)72].ca 284 H2O ([1-ethyl-3-methylimidazolium] [Mo132O372 (CH3COO)30 (H2O)72].ca 184 H2O) (abbreviated as [emim]POM), was synthesized and employed as a catalyst in the delignification of wood biomass. The synthesized [emim]POM catalyst was characterized by CNH analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. The results indicated that the 1-ethyl-3-methylimidazolium [emim] group was appended to a (NH4)42 [Mo132O372(CH3COO)30 (H2O)72].ca 120 H2O POM precursor in which the [emim] group replaced the ammonium group. The [emim]POM catalyst effectively delignified wood in an IL [emim][OAc] (1-ethyl-3-methylimidazolium acetate) system: The lignin content of the produced cellulose-rich material was ca. 7.0 %, much lower than the 32.0 % lignin content of the untreated wood biomass. The delignification efficiency was improved by optimizing IL catalyst loading, the IL concentration, and the reaction conditions. This POM-based IL could be used in the delignification of lignocellulosic biomass to isolate cellulose and lignin for further chemical and mechanical processing.
AB - Conversion of recalcitrant lignocellulosic biomass to renewable and valuable biopolymers has attracted global interest to build up sustainable societies. Delignification of biomass for separating such biopolymers (e.g., cellulose and lignin) has been used as an efficient process. However, conventional delignification methods suffer from considerable drawbacks and cannot be considered as clean processes. In this study, a new type of polyoxometalate (POM) ionic liquid (IL), [(C6N2H11)42][Mo132O372 (CH3COO)30(H2O)72].ca 284 H2O ([1-ethyl-3-methylimidazolium] [Mo132O372 (CH3COO)30 (H2O)72].ca 184 H2O) (abbreviated as [emim]POM), was synthesized and employed as a catalyst in the delignification of wood biomass. The synthesized [emim]POM catalyst was characterized by CNH analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. The results indicated that the 1-ethyl-3-methylimidazolium [emim] group was appended to a (NH4)42 [Mo132O372(CH3COO)30 (H2O)72].ca 120 H2O POM precursor in which the [emim] group replaced the ammonium group. The [emim]POM catalyst effectively delignified wood in an IL [emim][OAc] (1-ethyl-3-methylimidazolium acetate) system: The lignin content of the produced cellulose-rich material was ca. 7.0 %, much lower than the 32.0 % lignin content of the untreated wood biomass. The delignification efficiency was improved by optimizing IL catalyst loading, the IL concentration, and the reaction conditions. This POM-based IL could be used in the delignification of lignocellulosic biomass to isolate cellulose and lignin for further chemical and mechanical processing.
UR - http://www.scopus.com/inward/record.url?scp=84976287117&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84976287117&partnerID=8YFLogxK
U2 - 10.1007/s00226-016-0844-y
DO - 10.1007/s00226-016-0844-y
M3 - Article
AN - SCOPUS:84976287117
SN - 0043-7719
VL - 50
SP - 1213
EP - 1226
JO - Wood Science and Technology
JF - Wood Science and Technology
IS - 6
ER -
