A vacuum tolerant high voltage system with a low noise and low power Cockcroft-Walton photomultiplier base

T. Masuda; E. Iwai; N. Kawasaki; E. J. Kim; T. K. Komatsubara; J. W. Lee; G. Y. Lim; Y. Maeda; D. Naito; H. Nanjo; T. Nomura; Y. D. Ri; N. Sasao; K. Sato; S. Seki; K. Shiomi; Y. Sugiyama; M. Togawa; H. Watanabe; T. Yamanaka

doi:10.1016/j.nima.2014.02.007

A vacuum tolerant high voltage system with a low noise and low power Cockcroft-Walton photomultiplier base

T. Masuda
, E. Iwai
, N. Kawasaki
, E. J. Kim
, T. K. Komatsubara
, J. W. Lee
, G. Y. Lim
, Y. Maeda
, D. Naito
, H. Nanjo
, T. Nomura
, Y. D. Ri
, N. Sasao
, K. Sato
, S. Seki
, K. Shiomi
, Y. Sugiyama
, M. Togawa
, H. Watanabe
, T. Yamanaka

異分野基礎科学研究所

研究成果 › 査読

6 被引用数 (Scopus)

抄録

We developed a high voltage system for the electromagnetic calorimeter of the KOTO detector. The system is designed around a low noise, low power Cockcroft-Walton (CW) photomultiplier tube base with a high gain preamplifier. The low power makes it suitable for operations in vacuum. The low noise and high gain allow detecting signals in the 1 MeV range. We achieved a final noise level below 180μ^Vrms for a preamplifier gain of more than 40. A vacuum tolerant control system for the CW bases power distribution was also designed. This system is able to control and monitor the high voltage of each individual base.

本文言語	English
ページ（範囲）	11-19
ページ数	9
ジャーナル	Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
巻	746
DOI	https://doi.org/10.1016/j.nima.2014.02.007
出版ステータス	Published - 5月 11 2014

ASJC Scopus subject areas

核物理学および高エネルギー物理学
器械工学

文献へのアクセス

10.1016/j.nima.2014.02.007

他のファイルとリンク

引用スタイル

Masuda, T., Iwai, E., Kawasaki, N., Kim, E. J., Komatsubara, T. K., Lee, J. W., Lim, G. Y., Maeda, Y., Naito, D., Nanjo, H., Nomura, T., Ri, Y. D., Sasao, N., Sato, K., Seki, S., Shiomi, K., Sugiyama, Y., Togawa, M., Watanabe, H., & Yamanaka, T. (2014). A vacuum tolerant high voltage system with a low noise and low power Cockcroft-Walton photomultiplier base. Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 746, 11-19. https://doi.org/10.1016/j.nima.2014.02.007

Masuda, T, Iwai, E, Kawasaki, N, Kim, EJ, Komatsubara, TK, Lee, JW, Lim, GY, Maeda, Y, Naito, D, Nanjo, H, Nomura, T, Ri, YD, Sasao, N, Sato, K, Seki, S, Shiomi, K, Sugiyama, Y, Togawa, M, Watanabe, H & Yamanaka, T 2014, 'A vacuum tolerant high voltage system with a low noise and low power Cockcroft-Walton photomultiplier base', Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 746, pp. 11-19. https://doi.org/10.1016/j.nima.2014.02.007

@article{16aed7e7809f4b6fb86ddf32d42dc283,

title = "A vacuum tolerant high voltage system with a low noise and low power Cockcroft-Walton photomultiplier base",

abstract = "We developed a high voltage system for the electromagnetic calorimeter of the KOTO detector. The system is designed around a low noise, low power Cockcroft-Walton (CW) photomultiplier tube base with a high gain preamplifier. The low power makes it suitable for operations in vacuum. The low noise and high gain allow detecting signals in the 1 MeV range. We achieved a final noise level below 180μVrms for a preamplifier gain of more than 40. A vacuum tolerant control system for the CW bases power distribution was also designed. This system is able to control and monitor the high voltage of each individual base.",

keywords = "CW base, Calorimeter, J-PARC, KOTO, Photomultiplier tube",

author = "T. Masuda and E. Iwai and N. Kawasaki and Kim, \{E. J.\} and Komatsubara, \{T. K.\} and Lee, \{J. W.\} and Lim, \{G. Y.\} and Y. Maeda and D. Naito and H. Nanjo and T. Nomura and Ri, \{Y. D.\} and N. Sasao and K. Sato and S. Seki and K. Shiomi and Y. Sugiyama and M. Togawa and H. Watanabe and T. Yamanaka",

note = "Funding Information: We would like to express our gratitude to Matsusada Precision Inc. for their continuous discussions and support on technical matters during the design and production of the CW bases. This research was supported by KEK, MEXT KAKENHI Grant number 18071006 , the Japan/US Cooperation Program, Korea NRF ( 2012-004554 ), and Taiwan NSC . Some of the authors were supported by Grant-in-Aid for JSPS Fellows from the Japan Society for the Promotion of Science . ",

year = "2014",

month = may,

day = "11",

doi = "10.1016/j.nima.2014.02.007",

language = "English",

volume = "746",

pages = "11--19",

journal = "Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment",

issn = "0168-9002",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - A vacuum tolerant high voltage system with a low noise and low power Cockcroft-Walton photomultiplier base

AU - Masuda, T.

AU - Iwai, E.

AU - Kawasaki, N.

AU - Kim, E. J.

AU - Komatsubara, T. K.

AU - Lee, J. W.

AU - Lim, G. Y.

AU - Maeda, Y.

AU - Naito, D.

AU - Nanjo, H.

AU - Nomura, T.

AU - Ri, Y. D.

AU - Sasao, N.

AU - Sato, K.

AU - Seki, S.

AU - Shiomi, K.

AU - Sugiyama, Y.

AU - Togawa, M.

AU - Watanabe, H.

AU - Yamanaka, T.

N1 - Funding Information: We would like to express our gratitude to Matsusada Precision Inc. for their continuous discussions and support on technical matters during the design and production of the CW bases. This research was supported by KEK, MEXT KAKENHI Grant number 18071006 , the Japan/US Cooperation Program, Korea NRF ( 2012-004554 ), and Taiwan NSC . Some of the authors were supported by Grant-in-Aid for JSPS Fellows from the Japan Society for the Promotion of Science .

PY - 2014/5/11

Y1 - 2014/5/11

N2 - We developed a high voltage system for the electromagnetic calorimeter of the KOTO detector. The system is designed around a low noise, low power Cockcroft-Walton (CW) photomultiplier tube base with a high gain preamplifier. The low power makes it suitable for operations in vacuum. The low noise and high gain allow detecting signals in the 1 MeV range. We achieved a final noise level below 180μVrms for a preamplifier gain of more than 40. A vacuum tolerant control system for the CW bases power distribution was also designed. This system is able to control and monitor the high voltage of each individual base.

AB - We developed a high voltage system for the electromagnetic calorimeter of the KOTO detector. The system is designed around a low noise, low power Cockcroft-Walton (CW) photomultiplier tube base with a high gain preamplifier. The low power makes it suitable for operations in vacuum. The low noise and high gain allow detecting signals in the 1 MeV range. We achieved a final noise level below 180μVrms for a preamplifier gain of more than 40. A vacuum tolerant control system for the CW bases power distribution was also designed. This system is able to control and monitor the high voltage of each individual base.

KW - CW base

KW - Calorimeter

KW - J-PARC

KW - KOTO

KW - Photomultiplier tube

UR - https://www.scopus.com/pages/publications/84894657135

UR - https://www.scopus.com/pages/publications/84894657135#tab=citedBy

U2 - 10.1016/j.nima.2014.02.007

DO - 10.1016/j.nima.2014.02.007

M3 - Article

AN - SCOPUS:84894657135

SN - 0168-9002

VL - 746

SP - 11

EP - 19

JO - Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

JF - Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

ER -

A vacuum tolerant high voltage system with a low noise and low power Cockcroft-Walton photomultiplier base

抄録

ASJC Scopus subject areas

文献へのアクセス

他のファイルとリンク

フィンガープリント

引用スタイル