Development of electric rust preventive machining method in cylindrical grinding

Naohiro Nishikawa; Kazuhito Ohashi; Shinya Tsukamoto; Toshikatsu Nakajima

Development of electric rust preventive machining method in cylindrical grinding

Naohiro Nishikawa, Kazuhito Ohashi, Shinya Tsukamoto, Toshikatsu Nakajima

工学部

研究成果 › 査読

抄録

The electricity rust preventive machining method is proposed to effective prevents the workpiece from rusting in the cylindrical grinding only with water. The workpiece as a cathode is protected from rusting by supplying the electric current through the water. This method leads to the ecology machining because the water without extreme pressure agents, mineral oils and so on included in conventional machining fluid. Therefore, this method saves much work in a treatment of stale machining fluid. In this paper, the electric rust preventive machining method is developed and investigated its application to cylindrical grinding.

本文言語	English
ページ	653-658
ページ数	6
出版ステータス	Published - 12月 1 2005
イベント	3rd International Conference on Leading Edge Manufacturing in 21st Century, LEM 2005 - Nagoya 継続期間: 10月 19 2005 → 10月 22 2005

Other

Other	3rd International Conference on Leading Edge Manufacturing in 21st Century, LEM 2005
国/地域	Japan
City	Nagoya
Period	10/19/05 → 10/22/05

ASJC Scopus subject areas

産業および生産工学

他のファイルとリンク

引用スタイル

@conference{b05aee5358b1495cb58923e4ab2d12cb,

title = "Development of electric rust preventive machining method in cylindrical grinding",

abstract = "The electricity rust preventive machining method is proposed to effective prevents the workpiece from rusting in the cylindrical grinding only with water. The workpiece as a cathode is protected from rusting by supplying the electric current through the water. This method leads to the ecology machining because the water without extreme pressure agents, mineral oils and so on included in conventional machining fluid. Therefore, this method saves much work in a treatment of stale machining fluid. In this paper, the electric rust preventive machining method is developed and investigated its application to cylindrical grinding.",

keywords = "Cathodic protection, Cylindrical grinding, Effluent treatment, Electric rust preventive machining, Grinding fluid, Zero emission machining",

author = "Naohiro Nishikawa and Kazuhito Ohashi and Shinya Tsukamoto and Toshikatsu Nakajima",

year = "2005",

month = dec,

day = "1",

language = "English",

pages = "653--658",

note = "3rd International Conference on Leading Edge Manufacturing in 21st Century, LEM 2005 ; Conference date: 19-10-2005 Through 22-10-2005",

}

TY - CONF

T1 - Development of electric rust preventive machining method in cylindrical grinding

AU - Nishikawa, Naohiro

AU - Ohashi, Kazuhito

AU - Tsukamoto, Shinya

AU - Nakajima, Toshikatsu

PY - 2005/12/1

Y1 - 2005/12/1

N2 - The electricity rust preventive machining method is proposed to effective prevents the workpiece from rusting in the cylindrical grinding only with water. The workpiece as a cathode is protected from rusting by supplying the electric current through the water. This method leads to the ecology machining because the water without extreme pressure agents, mineral oils and so on included in conventional machining fluid. Therefore, this method saves much work in a treatment of stale machining fluid. In this paper, the electric rust preventive machining method is developed and investigated its application to cylindrical grinding.

AB - The electricity rust preventive machining method is proposed to effective prevents the workpiece from rusting in the cylindrical grinding only with water. The workpiece as a cathode is protected from rusting by supplying the electric current through the water. This method leads to the ecology machining because the water without extreme pressure agents, mineral oils and so on included in conventional machining fluid. Therefore, this method saves much work in a treatment of stale machining fluid. In this paper, the electric rust preventive machining method is developed and investigated its application to cylindrical grinding.

KW - Cathodic protection

KW - Cylindrical grinding

KW - Effluent treatment

KW - Electric rust preventive machining

KW - Grinding fluid

KW - Zero emission machining

UR - http://www.scopus.com/inward/record.url?scp=84883669581&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84883669581&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84883669581

SP - 653

EP - 658

T2 - 3rd International Conference on Leading Edge Manufacturing in 21st Century, LEM 2005

Y2 - 19 October 2005 through 22 October 2005

ER -

Development of electric rust preventive machining method in cylindrical grinding

抄録

Other

ASJC Scopus subject areas

他のファイルとリンク

フィンガープリント

引用スタイル