High-Temperature Fatigue Crack Propagation under Cyclic Temperature

Ryuichi Ohtani, Takayuki Kitamura, Naoya Tada

研究成果査読

1 被引用数 (Scopus)

抄録

In order to investigate crack propagation behavior of thermal fatigue on the basis of non-linear fracture mechanics, crack propagation tests were conducted for isothermal fatigue at several temperatures and for cyclic temperature fatigue. The results obtained were summarized as follows. (1) The fracture mechanics laws in isothermal fatigue dl/dN-ΔJf and dl/dN-ΔJc relations where dl/dN was crack propagation rate. ΔJf was fatigue J-integral range and ΔJc was creep J-integral range) showed little dependence on temperature. (2) A simple evaluation method of the values of ΔJf and ΔJc in thermal fatigue was proposed. (3) Crack propagation under cyclic temperature could be divided into two types which were cycle-dependent and time-dependent. dl/dN had good correlations with ΔJf and ΔJc for each type, respectively. (4) The transient condition between two types was given by a function of ΔJf and ΔJc. (5) The same fracture mechanics laws were obtained in isothermal and cyclic temperature fatigue.

本文言語English
ページ(範囲)1030-1036
ページ数7
ジャーナルTransactions of the Japan Society of Mechanical Engineers Series A
53
490
DOI
出版ステータスPublished - 1987
外部発表はい

ASJC Scopus subject areas

  • 材料科学(全般)
  • 材料力学
  • 機械工学

フィンガープリント

「High-Temperature Fatigue Crack Propagation under Cyclic Temperature」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル