Shower development of particles with momenta from 1 to 10 GeV in the CALICE Scintillator-Tungsten HCAL

CALICE collaboration

doi:10.1088/1748-0221/9/01/P01004

Shower development of particles with momenta from 1 to 10 GeV in the CALICE Scintillator-Tungsten HCAL

CALICE collaboration

研究成果 › 査読

11 被引用数 (Scopus)

抄録

Lepton colliders are considered as options to complement and to extend the physics programme at the Large Hadron Collider. The Compact Linear Collider (CLIC) is an e⁺e^-. collider under development aiming at centre-of-mass energies of up to 3 TeV. For experiments at CLIC, a hadron sampling calorimeter with tungsten absorber is proposed. Such a calorimeter provides sufficient depth to contain high-energy showers, while allowing a compact size for the surrounding solenoid. A fine-grained calorimeter prototype with tungsten absorber plates and scintillator tiles read out by silicon photomultipliers was built and exposed to particle beams at CERN. Results obtained with electrons, pions and protons of momenta up to 10 GeV are presented in terms of energy resolution and shower shape studies. The results are compared with several GEANT4 simulation models in order to assess the reliability of the Monte Carlo predictions relevant for a future experiment at CLIC.

本文言語	English
論文番号	P01004
ジャーナル	Journal of Instrumentation
巻	9
号	1
DOI	https://doi.org/10.1088/1748-0221/9/01/P01004
出版ステータス	Published - 1月 1 2014
外部発表	はい

ASJC Scopus subject areas

器械工学
数理物理学

文献へのアクセス

10.1088/1748-0221/9/01/P01004

他のファイルとリンク

引用スタイル

@article{52ae7e50bba24c61aefa844283389062,

title = "Shower development of particles with momenta from 1 to 10 GeV in the CALICE Scintillator-Tungsten HCAL",

abstract = "Lepton colliders are considered as options to complement and to extend the physics programme at the Large Hadron Collider. The Compact Linear Collider (CLIC) is an e+e-. collider under development aiming at centre-of-mass energies of up to 3 TeV. For experiments at CLIC, a hadron sampling calorimeter with tungsten absorber is proposed. Such a calorimeter provides sufficient depth to contain high-energy showers, while allowing a compact size for the surrounding solenoid. A fine-grained calorimeter prototype with tungsten absorber plates and scintillator tiles read out by silicon photomultipliers was built and exposed to particle beams at CERN. Results obtained with electrons, pions and protons of momenta up to 10 GeV are presented in terms of energy resolution and shower shape studies. The results are compared with several GEANT4 simulation models in order to assess the reliability of the Monte Carlo predictions relevant for a future experiment at CLIC.",

keywords = "Calorimeter methods, Detector modelling and simulations I (interaction of radiation with matter, interaction of photons with matter, interaction of hadrons with matter, etc), Particle identification methods",

author = "\{CALICE collaboration\} and C. Adloff and Blaising, \{J. J.\} and M. Chefdeville and C. Drancourt and R. Gaglione and N. Geffroy and Y. Karyotakis and I. Koletsou and J. Prast and G. Vouters and J. Repond and J. Schlereth and J. Smith and L. Xia and E. Baldolemar and J. Li and Park, \{S. T.\} and M. Sosebee and White, \{A. P.\} and J. Yu and G. Eigen and Thomson, \{M. A.\} and Ward, \{D. R.\} and D. Benchekroun and A. Hoummada and Y. Khoulaki and J. Apostolakis and D. Dannheim and A. Dotti and K. Elsener and G. Folger and C. Grefe and V. Ivantchenko and M. Killenberg and W. Klempt and \{Van Der Kraaij\}, E. and Lam, \{C. B.\} and L. Linssen and Lucaci-Timoce, \{A. I.\} and A. M{\"u}nnich and S. Poss and A. Ribon and A. Sailer and D. Schlatter and J. Strube and V. Uzhinskiy and C. C{\^a}rloganu and P. Gay and S. Manen and S. Uozumi",

note = "Publisher Copyright: {\textcopyright} CERN 2014.",

year = "2014",

month = jan,

day = "1",

doi = "10.1088/1748-0221/9/01/P01004",

language = "English",

volume = "9",

journal = "Journal of Instrumentation",

issn = "1748-0221",

publisher = "Institute of Physics",

number = "1",

}

TY - JOUR

T1 - Shower development of particles with momenta from 1 to 10 GeV in the CALICE Scintillator-Tungsten HCAL

AU - CALICE collaboration

AU - Adloff, C.

AU - Blaising, J. J.

AU - Chefdeville, M.

AU - Drancourt, C.

AU - Gaglione, R.

AU - Geffroy, N.

AU - Karyotakis, Y.

AU - Koletsou, I.

AU - Prast, J.

AU - Vouters, G.

AU - Repond, J.

AU - Schlereth, J.

AU - Smith, J.

AU - Xia, L.

AU - Baldolemar, E.

AU - Li, J.

AU - Park, S. T.

AU - Sosebee, M.

AU - White, A. P.

AU - Yu, J.

AU - Eigen, G.

AU - Thomson, M. A.

AU - Ward, D. R.

AU - Benchekroun, D.

AU - Hoummada, A.

AU - Khoulaki, Y.

AU - Apostolakis, J.

AU - Dannheim, D.

AU - Dotti, A.

AU - Elsener, K.

AU - Folger, G.

AU - Grefe, C.

AU - Ivantchenko, V.

AU - Killenberg, M.

AU - Klempt, W.

AU - Van Der Kraaij, E.

AU - Lam, C. B.

AU - Linssen, L.

AU - Lucaci-Timoce, A. I.

AU - Münnich, A.

AU - Poss, S.

AU - Ribon, A.

AU - Sailer, A.

AU - Schlatter, D.

AU - Strube, J.

AU - Uzhinskiy, V.

AU - Cârloganu, C.

AU - Gay, P.

AU - Manen, S.

AU - Uozumi, S.

PY - 2014/1/1

Y1 - 2014/1/1

N2 - Lepton colliders are considered as options to complement and to extend the physics programme at the Large Hadron Collider. The Compact Linear Collider (CLIC) is an e+e-. collider under development aiming at centre-of-mass energies of up to 3 TeV. For experiments at CLIC, a hadron sampling calorimeter with tungsten absorber is proposed. Such a calorimeter provides sufficient depth to contain high-energy showers, while allowing a compact size for the surrounding solenoid. A fine-grained calorimeter prototype with tungsten absorber plates and scintillator tiles read out by silicon photomultipliers was built and exposed to particle beams at CERN. Results obtained with electrons, pions and protons of momenta up to 10 GeV are presented in terms of energy resolution and shower shape studies. The results are compared with several GEANT4 simulation models in order to assess the reliability of the Monte Carlo predictions relevant for a future experiment at CLIC.

AB - Lepton colliders are considered as options to complement and to extend the physics programme at the Large Hadron Collider. The Compact Linear Collider (CLIC) is an e+e-. collider under development aiming at centre-of-mass energies of up to 3 TeV. For experiments at CLIC, a hadron sampling calorimeter with tungsten absorber is proposed. Such a calorimeter provides sufficient depth to contain high-energy showers, while allowing a compact size for the surrounding solenoid. A fine-grained calorimeter prototype with tungsten absorber plates and scintillator tiles read out by silicon photomultipliers was built and exposed to particle beams at CERN. Results obtained with electrons, pions and protons of momenta up to 10 GeV are presented in terms of energy resolution and shower shape studies. The results are compared with several GEANT4 simulation models in order to assess the reliability of the Monte Carlo predictions relevant for a future experiment at CLIC.

KW - Calorimeter methods

KW - Detector modelling and simulations I (interaction of radiation with matter, interaction of photons with matter, interaction of hadrons with matter, etc)

KW - Particle identification methods

UR - https://www.scopus.com/pages/publications/84893083453

UR - https://www.scopus.com/pages/publications/84893083453#tab=citedBy

U2 - 10.1088/1748-0221/9/01/P01004

DO - 10.1088/1748-0221/9/01/P01004

M3 - Article

AN - SCOPUS:84893083453

SN - 1748-0221

VL - 9

JO - Journal of Instrumentation

JF - Journal of Instrumentation

IS - 1

M1 - P01004

ER -

Shower development of particles with momenta from 1 to 10 GeV in the CALICE Scintillator-Tungsten HCAL

抄録

ASJC Scopus subject areas

文献へのアクセス

他のファイルとリンク

フィンガープリント

引用スタイル