Tensile properties and slip deformation behavior of pure titanium thin wire with a small diameter-to-grain-size ratio

研究成果査読

1 被引用数 (Scopus)

抄録

To investigate the tensile properties and slip deformation behavior of pure titanium thin wires with a small ratio of the diameter to the grain size, tensile tests and a stepwise tensile test were performed using specimens with a diameter of approximately 170 μm and grain sizes of 17 and 87 μm, corresponding to diameter-to-grain-size ratios of 10 and ∼2, respectively. The specimen with a diameter-to-grain-size ratio of 10 fractured through the growth of voids. The fracture morphology was similar to that of the bulk specimens. On the other hand, for specimens with a diameter-to-grain-size ratio of 2, fracture occurs owing to the local deformation, in which primary slip systems are activated in each grain. The stepwise tensile test of the specimen with a diameter-to-grain-size ratio of 2 indicated that the slip deformation tended to occur from the large grains. Moreover, the activities of the slip systems of grains were evaluated using the Schmid factor (SF) and critical resolved shear stress (CRSS) of each slip system. It was noted that slip systems with the highest SF∙CRSS−1 were activated for 30 out of 33 grains.

本文言語English
論文番号144532
ジャーナルMaterials Science and Engineering A
863
DOI
出版ステータスPublished - 1月 26 2023

ASJC Scopus subject areas

  • 材料科学一般
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Tensile properties and slip deformation behavior of pure titanium thin wire with a small diameter-to-grain-size ratio」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル